Giles 202 140 V2 + Vetron 26 CCM Benzin Motor

Specifications:

• Wing span: 1800 mm
• Wing Area: 62 dm2
• Wing Loading: 82~84 gr/dm2
• Airfoil: Naca-0013
• Total Length: 1820 mm
• Net weight: gr.
• Flying weight: 5100 gr.
• Construction: Glassfiber fuselage & wooden wings
• Engine/Motor require: 108~160 cu in 2 stroke or 120~140 cu in 4 stroke
• Radio require: 4ch
• Servos require: 6 servos
  

Product information:

This is CMPro GILES 202 140 ARF V2 (Almost Ready To Fly) scale sport Airplane. The Giles-202 V2 reflects the refinement of the modern full size competition aerobatic machine and as a result it can perform just about any manoeuvre in the book. With all built-up construction it is light and tough and is supplied pre-decorated. It is an excellent low weight pre-covered balsa and plywood Aerobatice airplane with pre-paint fibreglass cowl, landing gear and Wheel Pants . It comes with 2 pieces pre-covered wings, and tail assembly, Control Linkages, Hinges, Screws and clear canopy. The airplane has a very nice look and finishing, but it has also strong construction and great performance. The model can be Flight-Ready in 15-20 hours.

Inclusive:

1. One Pre-cover Balsa Fuselage
2. Two Pcs. Pre-built and covered wings and tail assemblies
3. All Pushrods, Control Linkages, Hinges, Screws, Nuts and Bolts
4. One Fiberglass Main landing gears
5. Fiberglass cowl and wheel pants
6. One tailwheel wire
7. Two main wheels
8. One tailwheel
9. One Engine mount and fuel tank
10. Decals, hardware package
11. One instructions manual
12. One CMPro Catalog

Requires:

1. 4-Ch. radio
2. 6 Servos: 2-Aileron, 2-Elevator, 1-Throttle, 1-Rudder, 1-retracts(optional)
3. 108~160 cu in 2 stroke or 120~140 cu in 4 stroke Engine and propeller
4. Five Servo Extensions and Two Y-Harness

 

V II