HPI Baja 5B 1/5 scale petrol powered Buggy

A New Dimention to Radion Controlled Cars HPI's new giant 2WD Baja 5B buggy will take RC Cars to a new dimension! The Baja 5B is a rear wheel drive 1/5th scale off-road buggy that is nearly 32" in length! Its design is revolutionary for large scale RC Cars following the style of classic Baja buggies with long suspension arms for great ground clearance and large suspension travel. The big size allows the Baja 5B to go where smaller buggies can't and makes the Baja 5B's driving experience as close as you can get to the real thing. The Baja 5B is big, but coming as a "Ready To Run" car, and powered by standard petrol it can't be easier to get ready for action. Everything is included in the kit - 1. Preassembled Baja 5B chassis, 2. Prepainted Baja body shell, 3. Preinstalled high quality FM radio gear with built in fail safe, 6V receiverpack and charger. 4. Preinstalled massive 23cc petrol engine providing plenty of power. All you need to do is fill up with standard petrol and some oil, and off you go! The innovative design of the Baja 5B has been developed and tested by HPI's designers over the last 18 months.The narrow channel chassis made from rigid 4mm aluminium gives the Baja 5B the classic look and extreme stiffness an

Long Travel Suspension Double wishbone suspension with long travel aluminium shocks gives superior Off-Road capability. The narrow Chassis design allows for super long suspension arms which results in smooth damping characteristics and long suspension travel. The completely new designed "Hyper Adjust Piston" shocks are made from aluminium and have 5 dampening settings that can be adjusted externally without removing the shocks. Dual rate springs give a progressive characteristic for a smooth suspension on all surfaces.

Roll cage, radio box, bodyshell ,wing, undertray, gear case all  mounted with clips for easy  maintenance	Easy off roll cage	Easy off water resistant radio box	Ventilated dual disk brake

Baja 5B Specifications:

Chassis

• Over all Length 817mm
• Height: 255mm 1G (280mm with 0G)
• Width: Front 460mm / Rear 480mm
• Tyre Track: Front 395mm / Rear 400mm
• Wheelbase: 570mm
• Right height: 76mm
• Suspension travel: Front 95mm / Rear 100mm
• Weight: 9.6kg (21.3lb)
• Camber: adjustable front with shims rear with screw
• Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock)
• Toe-in: adjustable front with tie rod rear with shims 2 / 3* / 4 degree each side(* stock)
• Air craft aluminium 6061 T6 monocoque chassis
• Double wish bone suspension with adjustable roll center F/R
• Twin plate ventilated disk brake
• Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio)
• Diff: torque control viscous with 4 pinon gears sealed diff case with silicone oil
• Shock absorber: 5 adjustable dampening and fully adjustable coil over spring
• Wheel type: 3 pcs with high impact nylon material

Engine

• 2 cycle piston valve gasoline engine
• Cooling system: air cooled
• Displacement: 23cc
• Maximum output: 2.4ps
• Fuel: pre-mixed fuel, 25 (Gasoline) : 1 (High grade 2 cycle engine oil)
• 700cc capacity fuel tank
• Starter Recoil: starter

Radio

• FM radio system with fail safe system
• Steering servo: Hi torque water resistant 25kg.cm with Speed 0.16sec/60 degree
• Throttle servo: Hi torque water resistant 6kg.cm with Speed 0.16sec/60 degree
• Recovery battery: 6V rechargeable NiCad buttery