| Specification |
| Servo tester | manual/auto 900 ~ 1500 ~ 2100us |
| Measure pulse | RX channel pulse(us) |
| Watt meter | 0.1 to 100.0A volts/Watt/mAh |
| Rotor blade tachometer | 800~3000RPM 10 data memories |
| Temperature sensor | 0 to 250 degree C |
| Battery checker/discharger | NiCd/MH 4.8/6.0/9.6V Lithium 7.4V |
| Electric load for battery check/discharge | 100 to 1000mA |
| Inboard battery | NiCd 4.8V, 300mAh |
| Weight | 350g |
| Dimension | 113x80x28 mm |
User's manual (2632KB)
- Precision pulse generator to test servos
You can test any brands of servo by movement, deflections, neutral point and band width.
It does not need battery to operate servo.
It shows the electric current to operate the servo simultaneously. This feature is very helpful to choose an appropriate RX battery for your model by adding all current load of servos.
- Watt meter upto 100A
You can estabolish your power plant with a right propeller for the best current.
Watt meter can be operated with tachometer
Automatic voltage/amp calibration. No need to calibrate the voltage of source.
Additional power supply is not needed even the input power source is less than 4.5V.
- Rotor blade tachometer
Precision tachometer up to 3000RPM. Rotating-drum type slit syncronize system.
Up to 10 incidental RPM can be stored to the memory.
- Temperature sensor
Solid-state temperature sensor by contacting the material being checked.
- RX battery checker/discharger
You can check your RX battery with a certain current load accurately.
NiCd 4.8/6.0/9.6V and Lithium 7.4V with 100 to 1000mAh current load
When being checked, the present voltage and the residue of capacity are displayed
NiCd batteries can be discharged to 0.9V/cell.
- Back-light LCD screen
You can adjust the brightness of LCD display
- Automatic power off and back-light off
To prevent from wasting the energy, the power will go off when there is no action for 10 minutes.
The back-light will go off in 1 minutes if you do nothing with the unit.
- Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat
| Accessories |
| EAC114 | Charging cable | Standard |
| EAC110 | Temperature sensor | Optional |
| EAC115 | Deans jacks with silicon cable for power IN/OUT | Optional |
|
|
|
|
