Falcon 400 PRO V2 2.4GHZ RTF

Falcon 400 Pro V2 is the newest version of the popular helicopter Falcon 3D/Hurrican 3D/Mini Pred 3D.  The model is released from Art-Tech in June 2008 with Art-Tech new V3 HH Gyro and computer radio. The new version 3 Gyro is faster than the V2 and much more stable in 3D flying. Art-Tech has changed also the AC wall charger to an adjustble balance Li-Po charger for more safty during the charging. The package is also incl. a strang training landing gear for size 400 to 450 helicopters and main/tail carbon blades. Falcon 400 Pro V2 is very staible helicopter for training and can also fly 3D. All these point make the helicopter suitble for biginners and the pilots who wants to try 3D flying with a very low-price helicopter incl. 2.4GHZ helicopter/Airplane computer radio with LCD disply.  The computer radio has helicopter, airplane and gliders mix and it can be also used in other helicopters and airplanes.

Specification

 

• 6CH R/C set included
• 6CH computer transmitter included, 2.4GHZ Mode 2 (Left hand throttle)
• Brushless speed controller
• Tail rotor driven
• Head lock gyro V3 (New version) 
• Powered by 11.1V 1300mAh re-chargeable Li-Po battery pack and balance charger
• 100% Ready to fly
• Full parts support
• Suitable for outdoor
• Body length: 540mm, width: 135mm
• Main rotor diameter: 630mm
• Tail rotor diameter: 125mm
• Total weight: 530g (including the battery)
• Motor: Brushless B20/10T

★ tail boom mounted rudder servo and durable landing struts.
★ Each model is individually inspected well at factory.
★ ball bearing tail blade grips with tail gear drivesystem.
★ Ready for flight out of box except 8 "AA" battery

 

INCLUDES:

1. One assembled Falkon 400 Pro V2 Advanced helicopter (RTF)
2. One 6channels 2.4GHZ computer radio with LCD display
3. One AC wall adaptor  (220V-12V)
4. One Adjustble Li-Po balance charger for 2-3 cells 0.3-1.2A 
5. One 6Ch. radio, receiver and 4 servo
6. One 11.1v 1300mAh Li-Po battery with balance connector
7. One small main blade holder
8. One adjusting screwdriver for receiver/gyro
9. One brushless motor
10. One ESC 30A
11. One training landing gear for size 400-450 helicopter 
12. One Falcon 400 V2 instruction manuel
13. One trainer cord/simulator interface cord/ USB cable/ cd and simulator manuel 

Spare parts

 PS: Video of Falcon 400 V2 Pro is not availble. The videoe below are from Falcon 3D V3and V4(the old versions)