CMPro Cessna 182 Skylane V3 ARF 1650mm

Specifications:  

• Wing span: 1650mm
• Wing Area: 36.5 dm2
• Wing Loading: 81~85 gr/dm2
• Airfoil: Naca-2412
• Total Length:1250 mm
• Net weight: gr.
• Flying weight: 2950 gr.
• Construction: Glassfiber fuselage and balsa wood
• Engine/Motor require: 40~52 cu in 2 stroke or 52~60 cu in 4 stroke
• Radio require: 5 ch
• Servos require: 6 servos
  

Product information:

This is CMPro CESSNA 182 SKYLANE 52 ARF (Almost Ready To Fly). The CMPro CESSNA 182 SKYLANE ARF is a scale airplane with many small scale details moulded in the pre-paint fibreglass fuselage and cowl. It comes with 2 pieces pre-covered wings, and tail assembly, scale decals which is already applied on the fuselage under clear coating for more durable use, Control Linkages, Hinges, Screws, clear canopy, scale looking part and all hardware. The Fiberglass moulded wing tips are set up to use optional lights. The sectioned flaps are aimed to reduce landing speed and make a smooth flight. The CMPro Cessna-140 is an extremely scale airplane and can be ready to fly after several hours.

Inclusive:

1. One Pre-paint Glassfiber Fuselage
2. Two Pcs. Pre-built and covered wings and tail assemblies
3. All Pushrods, Control Linkages, Hinges, Screws, Nuts and Bolts
4. Fiberglass cowl, wheel pants and wing tips
5. One set main landing gears
6. Three main wheels
7. Clear canopy
8. One Engine mount and fuel tank
9. En El-Motor mount
10. Tow Pcs. lights and battery 
11. Decals and hardware package
12. One instructions manual

Requires:

1. 4-5Ch. radio
2. 6 Servos: 2-Aileron,1-Elevator, 1-Throttle, 1-Rudder, 1-flaps
3. 40~52 cu in 2 stroke or 52~60 cu in 4 stroke Engine and propeller
4. Two Servo Extensions and one Y-Harness